ARSON MACHINE Picatinny WireGuide System Made Of CNC 6061 Aluminum 3PCS
ARSON MACHINE Picatinny WireGuide System Made Of CNC 6061 Aluminum 3PCS
ARSON MACHINE Picatinny WireGuide System Made Of CNC 6061 Aluminum 3PCS
ARSON MACHINE Picatinny WireGuide System Made Of CNC 6061 Aluminum 3PCS
ARSON MACHINE Picatinny WireGuide System Made Of CNC 6061 Aluminum 3PCS
ARSON MACHINE Picatinny WireGuide System Made Of CNC 6061 Aluminum 3PCS

ARSON MACHINE Picatinny WireGuide System Made Of CNC 6061 Aluminum 3PCS

SPC-1211-BK
$17.00
In-Stock
Quantity

Close
 

Security policy (edit with Customer reassurance module)

 

Return policy (edit with Customer reassurance module)

 

Delivery policy (edit with Customer reassurance module)

Description

In a world of zip ties, inner tubes and unclean wire routing, our Picatinny WireGuides  achieve peace through superior wire management.

Continuing on our rampage to rid the world of poorly constrained switch wires on firearms, the 1913 Picatinny rail was the next battle we had to win.  Staying with our minimalist design mantra we sought to create a solution that was both low profile and highly functional.  To this end we came up with our Picatinny WireGuide™ Clamps.

We started by making the clamps sit as low in the picatinny slot as possible with the minimal amount of stick out in all directions.  We also wanted the wire to sit under the bottom of the lower angle section of the Picatinny rail so that it would be out of the way as much as possible.  To do this, we took a rather unique approach to our solution, in that the wire itself becomes part of the clamping mechanism.  Some might say that this could be dangerous and possibly damage the switch wires, but fret not.  We designed our Picatinny WireGuides™ with safety in mind.  When properly torqued*** and installed on an in spec picatinny rail, the wire absolutely cannot be crushed to the point that the insulation fails. While the clamp does slightly compress the wire’s insulation, when installed properly, this will not cause damage.  If over torqued, the clamp will fail before the wire insulation is compromised.

With that out of the way, let us move on to the clamps themselves.  First we created our Single Wire Picatinny Clamp.  This small piece of machined and Type III Hard Anodized 6061 aluminum perfection was designed to hold a wire with a max diameter of 0.130″ (most standard switch wires are 0.110-0.125″).  As its honest name implies, it was designed to hold just 1 wire on whichever side of the Picatinny rail you choose.  This is a solid, functional piece that will serve all users well.  Installation is a breeze and you can use as many as you see fit to contain all the errant wires on your weapon.  It can be oriented to hold the wire on either side of the rail, making it simple and versatile.

Next is our Dual Wire Clamp.  This clamp, as it’s name implies, is designed to run 2 wires, one on each side of the Picatinny rail.  It can be used in many ways from helping those with multiple switches to those that have unique routing requirements.  Due to its Dual Hook design, and lack of a dovetail to interface with the picatinny rail (like on the Single Wire clamp) it MUST have a wire on each side to work properly.  When combined with the Single Wire Clamp(s) and our M-LOK or Keymod WireGuides™ your cable management woes will be a thing of the past.

Like all of our WireGuide™ Clamps, our Picatinny WireGuide™ Clamps are sold individually or a la carte if you want to be fancy about it.

Product Details
SPC-1211-BK
943 Items
8 other products in the same category:

Reference: SPC-1352-BK

SPECPRECISION BFL Belt Fed Slings Loop For 1.25" Slings

(1)

Made From Aluminum and Steel,Offering black and tan colors.Fits:M249 SAW, M240, and FN MinimiWorks around M4 and M16 handguardsSCAR, SIG, HK, AK or other eyeletsCan be mounted on the right hand side of AKs for left handed shooters

Price $15.00
More
In stock
F.A.Q.
Q: What payment methods do you accept?
A: We accept credit card payments through our online payment system. If you prefer to use PayPal, please email us at [email protected] to inform us, and we will send you a PayPal invoice.

Q: How is the product quality?
A: We have full confidence in the quality of our products. We conduct several rounds of inspections before shipping to ensure they are in perfect working condition. If any damage occurs during transportation, please contact your product manager, Cathy. She will handle it properly, and we can guarantee the safety of your money at all times.

Q: How is the delivery done?
A: We offer free delivery to most countries worldwide, including the United States, United Kingdom, Canada, Japan, Korea, and Europe. We are familiar with the laws of each country. During shipping, we declare a lower value to avoid taxes. However, if you need faster delivery, we are happy to arrange it through DHL, FedEx, or UPS, which typically takes around 4-10 days for delivery.

Q: Do you accept custom logos?
A: Our AIRSOFT scopes usually come with the original logo. However, we can customize your logo and packaging box on the scope or flashlight body for free. Please email us at [email protected] with the product, quantity, and any design or text requirements.

Q: Do you accept custom production?
A: We can customize the production of various products for you, including scopes, laser pointers, flashlights, and mounts. Please provide your requirements, such as shock resistance level, waterproofness, and whether nitrogen filling is needed. It is also important to specify if they are for AIRSOFT or firearms use. We can replicate based on physical samples or accept design drawings. Once we receive your requirements, we will provide a detailed quotation. Please send your inquiries to [email protected].

If you have any further questions or need additional information, please let us know.

Recommended new products

Product Reviews / Q&A

Average rating

5.0
3 Reviews
★★★★★ Excellent 3
★★★★☆ Good 0
★★★☆☆ Medium 0
★★☆☆☆ Poor 0
★☆☆☆☆ Terrible 0

  • Reviews (3)
  • Questions & Answers (0)

Follow us on Facebook