Tactical Airsoft 5MOA Red&Green dot Reticle,1X30mm Wide Field of View Sight – Designed for airsoft and crossbows, featuring bullet drop compensation (BDC) for enhanced accuracy. Equipped with both red and green dot options, ensuring optimal visibility in various lighting conditions.
The 1X30MM RED/GREEN 3DOT is designed exclusively for airsoft and crossbow aiming applications, with an effective range of 50 yards. It features adjustable windage and elevation controls.
Item E1 counter-clockwise is turns to allow for installation onto the pleathrow rail on your crossbow.
Note: Do NOT exceed 10 turns as this can release the spring-out separate the mounting block from the scope completely. Attach the sight base onto pleathrow rail with the eyeglass (Figure 1. Item A), positioned towards the rear of the bow.
Note: The eye piece will be clear and rendered. Ensure that the 2 screws in the base of the sight are seated correctly in the groove of the pleathrow rail so that the sight sits flush. As there is no set eye relief for red dot sights, allow a minimum of three inches of space between the eyeglass and the shootout eye when the shooting position. Tighten looking screws with the provided 3/32F Allen key.
Note: - to avoid stripping these screws do not overfighten.)
Sight Layout
A. Eye Piece
B. Windage Adjustment
C. Elevation Adjustment
D. Battery Cap
E. Rheostat Knob (Illumination)
F. Objective End
G. Spring Loaded Locking Screws
Installing Batteries & Illumination
Your red dot sight is powered by one 3V lithium coin cable battery, type 9238. To install the battery, unscrew the Battery Compartment Cap (Figure 1. Item B) on one of the rheostat illumination knob and insert the batteries positive (+) side up. Replace the battery cover. If the red dot dimers or does not light at all, replace battery with a new one.
Maintenance
When not in use, the Red Dot Sight should be kept in one of the off positions, in a clean, dry and ventilated place away from any corrosive material. Never try to take the sight apart or try to clean it internally. Send your sight to a qualified service station! If it ever needs repair, lens surface may be cleaned with a lens cloth.
Referência: SPC-1834-BK
High-End Deluxe P-ii Perfect Replica Red Dot, suitable for Airsoft, GBB, and Firearms. Made by 6068AL, CNC tech, Strong build, hold recoil of 5.56/9mm,with full original markings.
Referência: SPC-2060-FDE
R9T Dual Zero Sight is a durable red dot sight built around a 7075 aluminum housing with independently zeroed red and green emitters. It includes NV compatibility, crystal-clear front and rear lenses, and a proprietary optical design that helps reduce downrange light signature. With up to 20,000 hours of battery life, IPX7 waterproof and fog-proof...
Referência: SPC-1979-BK
Marca: EVOLUTION GEAR
3.5 MOA Stainless steel and anodized aluminum construction Compact size: 46×24 mm Parallax-free Automatic brightness control
Referência: SPC-1906-BK
TACTICAL AIRSOFT MPS Red Dot, FMC multi-coated optical lens, CNC-machined 6063 aluminum alloy, available in Black and Tan. Features NV compatibility and comes with a sight mount included.
Referência: SPC-1710-BK
1×24 mm Reflex 4.5moa red dot sight,Hold recoil from caliber .223/5.56 Or Tactical airsoft milsim GBB.operation with optical fiber automatic photosensitiv.
Referência: SPC-0046-FDE
Marca: EVOLUTION GEAR
Referência: SPC-1814-BK
Airsoft ROMEO2 Optic Switchable open/enclosed red dot with 32 MOA&3 MOA dot circle . Red or green reticle options. Creative, modular design for maximum adaptability.
Tactical Airsoft 5MOA Red&Green dot Reticle,1X30mm Wide Field of View Sight – Designed for airsoft and crossbows, featuring bullet drop compensation (BDC) for enhanced accuracy. Equipped with both red and green dot options, ensuring optimal visibility in various lighting conditions.
