Banner
High-quality mount and plate are used for sight, flashlight for picatinny weaver rail. Night vision helmet mount and shroud.Available for Tactical airsoft and firearms.
Unterkategorien
238 Artikel gefunden
The 14LT3 is a modular, multi-angle mounting arm for AN/PVS-14 night vision devices. A 7075-T6 aluminum body, stainless steel hardware and hard-anodized finish form the arm assembly, with an LT3 dovetail interface on the mount side.
The MLT3 connects the mini rail interface of MUM14 and NVM14 night vision devices to an LT3 dovetail mounting interface. Its articulated arm uses a 7075-T6 aluminum chassis, 316L stainless steel components and Type III hardcoat anodizing.
Artikel-Nr.: SPC-2067-BK
PA 30mm Tactical Two-Piece Scope Rings feature an extra-high 1.59" optical centerline, designed for 30mm tube optics. Made from high-quality aluminum with a matte black anodized finish, each ring features six Torx screws for secure mounting. Compatible with MIL-STD-1913 Picatinny and Weaver rail platforms.
Artikel-Nr.: SPC-2047-BK
CNC machined from 7071 aircraft-grade aluminum with 4041 steel adjustment components. Compatible with EOTECH G33/G43/G45, Vortex Micro3X and Trijicon 3X magnifiers. Available in 1.57" and 1.93" optical center heights for alignment with T2 and EXPS3 height optic setups.
Artikel-Nr.: SPC-2057-BK
The SPECPRECISION Universal Shotgun Red Dot Mount is designed for red dot sights using the Aimpoint Micro / T2 footprint, providing a low-profile mounting solution for compatible shotguns. Its ultra-low mounting position helps keep the optic close to the receiver for a more natural sight picture and streamlined setup. The universal design includes...
Artikel-Nr.: SPC-2064-BK
FAST Microprism Mount 2.26″ Height for Primary Arms Optics is CNC-machined from durable 7075 aluminum with a hard-anodized finish. It features a 2.26″ optical centerline height, a reinforced steel rail clamp, and upgraded screws with pre-applied thread locker. Designed to pair with the FAST FTC PA Mount for a consistent optic height, and compatible with...
Artikel-Nr.: SPC-2059-BK
FAST FTC PA Mount for Primary Arms SLx Micro Magnifier is specially designed for the PA SLx Micro Magnifier, featuring a durable aluminum and steel construction with a 2.26" optical center height. Available with the original-style logo, and custom logo engraving can also be provided upon request.
Artikel-Nr.: SPC-1659-BK
The SPECPRECISION PVS14 NPBM-D Non-Powered Bridge NVG Mount is crafted from aerospace-grade aluminum and CNC-machined for superior durability and precise mounting. Its mil-spec hard anodizing enhances corrosion and wear resistance, making it ideal for rugged environments. This lightweight NVG mount is designed for extended use without adding extra burden,...
Artikel-Nr.: SPC-9752-BK
Cantilever:40mm/1.57” Color:Black Hardcoat Anodized Height:38mm Quick Release:Yes Rail/Type:Picatinny Tilt:6 MIL/20.6 MOA Tube Diameter:30 mm
Artikel-Nr.: SPC-1810-BK
The RDF-20153KE Hybrid Mount is designed to seamlessly integrate G43 and G33 magnifiers with red dot sights, offering an optical center height of 1.53 inches. Compatible with most AR-15 and M4 platforms, with a moderate height, ideal for versatile tactical configurations.Featuring a quick detach (QDP) system, this mount allows for fast and secure...
Artikel-Nr.: SPC-1927-FDE
Precision-machined from 7075 aluminum, this mount is compatible with the majority of red dot sights built on the ACRO P1/P2 footprint.
Artikel-Nr.: SPC-1982-BK
The SPECPRECISION RMR Cut to ACRO Adapter Plate converts compatible GL-MOS slide mounting patterns to an ACRO footprint interface, allowing installation of ACRO footprint red dot optics. Made from CNC machined 6061-T6 aluminum with an anodized finish, this lightweight optic adapter provides a durable and low-profile mounting solution. Compatible with...
Artikel-Nr.: SPC-1653-BK
The Electric Scope Switch mount is meticulously crafted using CNC machining from high-quality aluminum, ensuring both durability and precision. This innovative mount features a built-in rechargeable lithium battery, allowing for extended use without the need for constant battery replacement. It is designed to be compatible with a wide range of LPVO...
Artikel-Nr.: SPC-1696-FDE
Tactical G GROUP HYDRA Mountis built for usability and durability, featuring Allen wrench pass-through holes for easy mounting, a shorter back base for closer FTC magnifier placement, and a wider cable management hole with a strengthened neck for better organization. It also includes direct mount laser screw holes and a durable anodized coating.
Artikel-Nr.: SPC-1811-FDE
Durable and lightweight 34mm scope mount made from CNC-machined 6061-T6 aerospace aluminum with a hard anodized finish. Designed for tactical use, ideal for RAZOR 1-10x LPVO and all 34mm tube scopes.
Artikel-Nr.: SPC-10003-BK
The SR-4006 34mm Diameter 1.35" Height PICATINNY Split Mounts 0MIL/0MOA provide exceptional strength, stability, and zero retention for tactical rail setups. Now comes with a FREE SPECPRECISION Optic Leveler for precise optic alignment. Ideal for dual mounts and flexible configurations on any PICATINNY rail.
Artikel-Nr.: SPC-2052-BK
The SPECPRECISION Glock MOS to ACRO Footprint Adapter Plate converts compatible standard GLOCK MOS slides to an ACRO-compatible optic footprint, allowing installation of enclosed red dot sights using the ACRO-style mounting interface. Designed for standard GLOCK MOS configurations, this adapter supports a wide range of GLOCK MOS models including G17 MOS,...
Artikel-Nr.: SPC-1660-BK
The Binocular Bridge NVG Mount Horn Interface is made from aerospace-grade aluminum, CNC machined, and finished with anodized surface treatment.
Artikel-Nr.: SPC-1699-FDE
The AUS Mount is a lightweight, slim-line, low-profile, anti-snag design mounting solution for 30mm diameter magnified optics. It attaches to any M1913 Picatinny rail for quick and tool-free installation.Black and FDE color with original markings in stock now!
Artikel-Nr.: SPC-1812-BK
SP-5002 Ø35 H38mm 0MIL PIC, CNC machined from T6061-T6 aluminum alloy with a hard anodized surface finish. Suitable for 35mm scopes, such as Leupold and any other scopes with a 35mm tube diameter.
