SPECOPTICS T60 Mini Thermal Red Dot Sight – Firmware V1.0.6 Update & Upgrade Guide

We're excited to announce the release of Firmware V1.0.6 for the SPECOPTICS T60 Mini Thermal Red Dot Sight!

This update brings three improvements to the T60 Mini, including a more accurate battery display, customizable reticle colors, and enhanced photo and video recording with the full on-screen interface.

Let's take a closer look at what's new.

1. Improved Battery Display

We've optimized the battery indicator to make it easier to check the remaining battery level.

When charging the T60 Mini, the screen now displays the battery percentage, allowing you to monitor the charging progress more clearly.

2. Customizable Reticle Colors

Firmware V1.0.6 introduces more flexibility in reticle color settings.

You can now adjust the outer ring and center dot colors independently, making it easier to customize the reticle to your personal preferences and viewing conditions.

Whether you prefer matching colors or a different color for the center dot, you now have more control over your reticle setup.

3. Full UI Display in Photos and Videos

We've also improved the photo and video recording function.

Previously, the full on-screen interface was not included in captured images and recordings.

With V1.0.6, photos and videos now capture the complete on-screen UI, including the reticle and current thermal sight settings.

This allows you to clearly review:

• The reticle's position relative to the target.

• The current settings displayed on the thermal sight.

• The complete viewing experience at the time of capture.

This improvement is especially useful when reviewing recorded footage or sharing real-world performance demonstrations.

4. Firmware V1.0.6 Availability

All T60 Mini units ordered on or after January 5, 2026, will come with Firmware V1.0.6 pre-installed.

If you purchased your T60 Mini before this date, you can update your device by following the firmware upgrade instructions below.

5. How to Upgrade Your T60 Mini to V1.0.6

Before You Start

Please prepare the following files and equipment:

• A Mini T60 Thermal Red Dot Sight.

• A USB Type-C data cable (make sure it supports data transfer, not charging only).

• A Windows computer.

• Driver installation package: DriverAssistant.zip

• Firmware upgrade tool: SocToolKit.zip

• Latest firmware file: MiniT60_V1.0.6.img

Download Files:

• Download MiniT60_V1.0.6 Firmware Package

Step 1. Install the USB Driver

Download and extract DriverAssistant.zip.

Open the extracted folder and run DriverInstall.exe to install the required USB driver.

Follow the installation prompts and wait until the installation is complete.

Step 2. Open the Firmware Upgrade Tool

Extract SocToolKit.zip and open SocToolKit.exe.

When the chip selection window appears, keep the default settings and click OK to continue.

The firmware upgrade interface will then open.

Step 3. Connect the Mini T60 in Loader Mode

1. Make sure the Mini T60 is completely powered off.

2. Press and hold the UP button on the device.

3. While holding the UP button, connect the Mini T60 to your computer using the USB Type-C data cable.

4. Wait for the computer and upgrade tool to recognize the device.

The device should enter Loader Mode and appear in the upgrade tool.

Step 4. Select the Firmware and Upgrade

Once the device is recognized:

1. Click the Firmware button in the upgrade tool.

2. Select the firmware file: MiniT60_V1.0.6.img.

3. Click the Upgrade button to start the firmware update.

Make sure the correct firmware file is selected before proceeding.

Step 5. Complete the Firmware Upgrade

Wait for the upgrade process to finish.

Do not disconnect the USB cable or interrupt the process while the firmware is being installed.

When the progress reaches 100% and the tool indicates that the upgrade has completed successfully:

1. Disconnect the USB Type-C cable.

2. Power on the Mini T60.

3. Check that the device starts normally and that all functions work properly.

Your Mini T60 is now upgraded to Firmware V1.0.6!

Important Notes

• Use a USB Type-C data cable that supports data transfer.

• Make sure the correct firmware file is selected.

• Do not disconnect the USB cable or shut down your computer during the upgrade.

• Follow the instructions carefully to avoid interrupting the firmware installation.

Need Help?

If you encounter any problems during the upgrade or have questions about the new firmware, please contact our support team:

Email: [email protected]

Thank you for choosing SPEC. We will continue improving the Mini T60 firmware to provide a better user experience.