The SPECPRECISION Glock MOS to ACRO Footprint Adapter Plate converts compatible standard GLOCK MOS slides to an ACRO-compatible optic footprint, allowing installation of enclosed red dot sights using the ACRO-style mounting interface.
Designed for standard GLOCK MOS configurations, this adapter supports a wide range of GLOCK MOS models including G17 MOS, G19 MOS, G20 MOS, G21 MOS, G22 MOS, G23 MOS, G34 MOS, G35 MOS, G40 MOS, G41 MOS, G45 MOS and G47 MOS.
Compatible with ACRO-footprint optics including the SPECOPTICS Sentinel V3 Solar Enclosed Multi-Reticle 1x24mm Red Dot Sight and other ACRO-compatible enclosed red dot sights.
Not compatible with Slimline MOS models such as G43X MOS and G48 MOS.
The SPECPRECISION Glock MOS to ACRO Adapter Plate is a precision-machined optic adapter designed to convert a compatible standard GLOCK MOS slide interface into an ACRO-compatible mounting footprint.
It allows users to install Aimpoint ACRO series optics as well as other enclosed red dot sights that use a compatible ACRO-style or ACRO-compatible mounting interface.
Machined from 6061-T6 aviation-grade aluminum, the adapter combines precise fitment, low weight and a compact profile. Its black anodized surface provides a clean matte appearance while helping protect the aluminum surface during regular use.
This adapter creates a mounting interface between a compatible standard GLOCK MOS slide and an ACRO-footprint red dot sight.
Instead of being limited to one specific optic model, the adapter can be used with a variety of enclosed red dot sights that share a compatible ACRO-style mounting interface.
This makes it a practical solution for users looking for a Glock MOS ACRO adapter plate, MOS to ACRO adapter, or Glock MOS enclosed red dot adapter.
Designed for compatible standard full-width GLOCK MOS configurations, including:
Important: Compatibility is based on the mounting interface and slide configuration. Always verify that your slide uses the compatible standard GLOCK MOS mounting system before ordering.
This adapter is not compatible with GLOCK Slimline MOS models, including:
Slimline MOS models use a different optic mounting configuration and should not be used with this adapter.
The upper mounting interface is designed around an ACRO-compatible footprint.
It can accept Aimpoint ACRO series optics and other enclosed red dot sights that use a compatible ACRO-style mounting system.
Compatible examples include:
The SPECOPTICS Sentinel V3 uses an ACRO footprint, while the SPECOPTICS NEO-E2 uses an ACRO-style / ACRO-compatible mounting interface, making both suitable optic options for this adapter.
The adapter plate is CNC machined from 6061-T6 aviation-grade aluminum for a balance of structural strength, precision and low weight.
At only 15.6 g / 0.55 oz, the adapter adds minimal additional weight to the optic setup.
The aluminum surface features a black anodized finish that provides a clean, low-profile appearance and additional surface protection.
With overall dimensions of only 48.7 × 27.5 × 5.95 mm / 1.917 × 1.083 × 0.234 in, the adapter maintains a compact mounting profile while providing the required interface between the MOS slide and compatible ACRO-style optic.
Remove the existing MOS cover plate, position the SPECPRECISION adapter on the compatible MOS interface, and secure it using the supplied mounting screws.
Once the adapter is properly installed, mount the compatible ACRO-footprint optic according to the optic manufacturer's installation instructions.
Included mounting screws: M3 × 0.5 × 5 mm
A Glock MOS to ACRO adapter plate converts a compatible standard GLOCK MOS optic mounting interface into an ACRO-compatible footprint, allowing compatible ACRO-style enclosed red dot sights to be installed.
No. It is designed around an ACRO-compatible mounting footprint. In addition to compatible Aimpoint ACRO optics, it can also be used with other red dot sights that use a compatible ACRO-style mounting interface.
Yes. The SPECOPTICS Sentinel V3 Solar Enclosed Multi-Reticle 1x24mm Red Dot Sight uses an ACRO footprint and is compatible with this adapter when the adapter is installed on a compatible standard GLOCK MOS slide.
Yes. The SPECOPTICS NEO-E2 3.5MOA Enclosed Red Dot Sight uses an ACRO-style / ACRO-compatible mounting interface and is a suitable optic option for this adapter.
No. The G43X MOS is a Slimline MOS model and uses a different mounting configuration.
No. The G48 MOS is also part of the Slimline MOS family and is not compatible with this adapter.
The adapter is CNC machined from 6061-T6 aviation-grade aluminum and features a black anodized surface finish.
The adapter weighs approximately 15.6 g / 0.55 oz.
This product is manufactured and sold by SPECPRECISION as an independent aftermarket compatibility accessory.
ACRO and Aimpoint are trademarks and/or registered trademarks of their respective owner. SPECPRECISION is not affiliated with, authorized by, licensed by, sponsored by, or endorsed by Aimpoint.
The terms “ACRO,” “ACRO footprint,” and “ACRO-compatible” are used solely to identify the mounting interface and describe product compatibility.
SPECPRECISION has not received authorization or a license from Aimpoint to use the ACRO trademark. References to ACRO are strictly descriptive and do not imply any commercial relationship, partnership, approval or endorsement.
GLOCK and MOS are trademarks and/or registered trademarks of their respective owner. SPECPRECISION is not affiliated with, authorized by, sponsored by, or endorsed by GLOCK.
All trademarks, product names and brand names referenced on this page remain the property of their respective owners.
Always verify the mounting interface and fitment of both the slide and optic before installation.
Referencia: SPC-1927-FDE
Precision-machined from 7075 aluminum, this mount is compatible with the majority of red dot sights built on the ACRO P1/P2 footprint.
Referencia: SPC-1507-BK
Referencia: SPC-1317-BK
Made of steel, it is very sturdy and maintains zero. (English translation)
Referencia: SPC-1535-FDE
Group Mount Kit is the first dual optic mount designed for end-users that offers a 2.91” Optic Centerline for faster target ID, regardless of gear/ equipment obstructions, ie. EarPro/Comms headsets, Gas masks/ CBRN, and Night vision use. A higher Optic allows for a more athletic posture and “Heads-up” attitude that enables the end-users to maintain a...
Referencia: SPC-1696-FDE
Tactical G GROUP HYDRA Mountis built for usability and durability, featuring Allen wrench pass-through holes for easy mounting, a shorter back base for closer FTC magnifier placement, and a wider cable management hole with a strengthened neck for better organization. It also includes direct mount laser screw holes and a durable anodized coating.
Referencia: SPC-1790-BK
SPECPRECIION SHOTGUN RED DOT MOUNT is a precision-engineered optic mounting platform specifically designed for shotguns, featuring full compatibility with the RMR & ACRO footprint. Constructed from aerospace-grade aluminum and CNC-machined for tight tolerances, the mount ensures exceptional mechanical stability, optimal recoil resistance, and secure...
Referencia: SPC-0006-BK
Marca: SPECPRECISION
Referencia: SPC-0960-BK
The optical center height of the sight is 2.91 inches. Made by 6068 Aluminium,Group Riser Mount TypeB For Airsoft Loadout Laser Aming And EXPS3/romeo8t/romeo5/uh1 red dot sight combo loadout
The SPECPRECISION Glock MOS to ACRO Footprint Adapter Plate converts compatible standard GLOCK MOS slides to an ACRO-compatible optic footprint, allowing installation of enclosed red dot sights using the ACRO-style mounting interface.
Designed for standard GLOCK MOS configurations, this adapter supports a wide range of GLOCK MOS models including G17 MOS, G19 MOS, G20 MOS, G21 MOS, G22 MOS, G23 MOS, G34 MOS, G35 MOS, G40 MOS, G41 MOS, G45 MOS and G47 MOS.
Compatible with ACRO-footprint optics including the SPECOPTICS Sentinel V3 Solar Enclosed Multi-Reticle 1x24mm Red Dot Sight and other ACRO-compatible enclosed red dot sights.
Not compatible with Slimline MOS models such as G43X MOS and G48 MOS.
