The ARA Offset Optic Mount is a modular and durable mounting solution made from CNC-machined 7075 aluminum with hard coat anodizing. It offers users the flexibility to select either a 35 or 45-degree offset position for their red dot sights without requiring extra components. The mount’s unique design ensures vertical alignment over the bore, providing consistent height and a seamless transition between primary optics and offset red dots. It supports a wide variety of red dot sights with interchangeable plates, making it fully ambidextrous.
The mount is CNC machined from 7075 aluminum and Hard Coat anodized. Includes necessary screws to attach light body to mount.
Offset Optic Mount is a modular mounting solution that allows the user to select a 35 or 45 degree offset position for their red dot sight without additional components.
The 35 degree position brings the red dot sight up closer to slimmer, smaller scopes, while the 45 degree position provides additional clearance around wider turrets.
The mount is set to 35 or 45 degrees by reversing the stem between the optic plate and base during assembly. The mount's unique geometry correctly aligns the optic vertically over the bore and maintains a consistent height at both 35 and 45 degrees.
The base and optic plates can be reversed, making the mount fully ambidextrous.
It is recommended that you choose the plate height that corresponds to your primary optic height. For example, if your scope is mounted in a 1.54” height mount, you’d choose the regular height plate for your offset red dot.
This ensures a consistent cheek weld and seamless transition between your primary optic and offset red dot.
A wide selection of red dot sights are supported with interchangeable optic plates.
Specifications:
material: 7075 Aluminum Alloy
Colour:Black
Weight: 50g
Fit for Holosun 407C, 507C, 508T, T-1 rds/T-2 rds/H1/H2, SIG Romeo 5 (not 5X), Holosun HS403, HS503, HS515, HS530
Référence: SPC-9040-BK
Red dot and magnifier mount set, made from CNC-machined aluminum with anodized surface treatment. The optical center height is 0.9 inches.
Référence: SPC-1399-BK
The lower 1/3 co-witness height is 40.4mm (1.6 inches) BCM Lower 1/3 Co witness A/T Optic Mount for M R OCapability in the face of the unexpected and catastrophic, the Lower 1/3 Co witness Mount is built in anticipation of a “no fail” shot that will save another human life.
Référence: SPC-1978-BK
The SPECOPTICS SPU-P2 Mount allows ACRO-footprint red dot sights, such as P1 and P2, to work with G33, G43, and G45 style magnifiers at a 1.54" / 39mm optical center height. With quick-detach installation and a flip-to-side magnifier design, it enables fast switching between 1X and magnified aiming.
Référence: SPC-1239-BK
Marque: EVOLUTION GEAR
The DOT Mount attaches to any M1913 Picatinny rail, 1.93″ height. Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process, and sit flush with the body of the mount for a low-profile, anti-snag design.
Référence: SPC-1387-BK
HRT Mount SM-2007B Black and FDE MICRO footprints Fits Model: T1, T2, H2, M5,M5S For Picatinny or STANAG NATO rail with the two Torx screws.
Référence: SPC-1535-FDE
Group Mount Kit is the first dual optic mount designed for end-users that offers a 2.91” Optic Centerline for faster target ID, regardless of gear/ equipment obstructions, ie. EarPro/Comms headsets, Gas masks/ CBRN, and Night vision use. A higher Optic allows for a more athletic posture and “Heads-up” attitude that enables the end-users to maintain a...
Référence: SPC-1067-BK
Référence: SPC-1429-BK
With a height range of 1/3 co-witness height to a maximum of 1.93 inches , Strike Variable mount allows for precise, incremental height adjustments via notches on the slider. Made from lightweight and high-strength Steel and machined with precision, the Strike Variable Optic Mount is a user-defined height to configure you specific setup for your specific...
The ARA Offset Optic Mount is a modular and durable mounting solution made from CNC-machined 7075 aluminum with hard coat anodizing. It offers users the flexibility to select either a 35 or 45-degree offset position for their red dot sights without requiring extra components. The mount’s unique design ensures vertical alignment over the bore, providing consistent height and a seamless transition between primary optics and offset red dots. It supports a wide variety of red dot sights with interchangeable plates, making it fully ambidextrous.
