![SPECPRECISION ZERO SUMMIT 1.70" 34mm Scope Mount](https://www.specprecision.com/26481-large_default/specprecision-zero-summit-170-34mm-scope-mount.jpg "SPECPRECISION ZERO SUMMIT 1.70" 34mm Scope Mount")
Zero Summit 34mm scope mount, 1.7″ optical center height, 2″ offset, 7075-T651 aluminum, 0 MOA, 1.3″ width, anodized finish.
Product Info for Zero Summit 34mm Ring:
We set out to create a better scope clamping solution that could securely hold a scope without damaging the scope tube. The problem with using only two pieces to clamp 360 degrees around a tube is that there must be clearance allowed for assembly and material stretch under tension. (Example; The gaps on each side of most scope mounts.) As the rings are tightened compressing the scope tube, the scope tube takes the shape of the allowed space, deforming it. Consequently, the deformation of the scope tube affects the position and alignment of the lenses and components inside the scope, degrading the quality and clarity of the image.image
Using a three-piece design, we overlap each piece into the next creating a seamless contact area that maintains the scope tubes original shape. Having the rings come together at a single central point allows them to swing together evenly as they are torqued, eliminating the roll that makes setting up a scope in other mounts so tedious and time consuming.
Specifications for Zero Summit 34mm Ring:
Manufacturer: Zero Gravity
Fabric/Material: 7075-T651 Aluminum
Offset: 2 in
Base/Mount Type: Cantilever Ring mount
Tube Diameter: 34 mm
Cant: 0 MOA
Width: 1.3 in
Finish: Anodized
Features of Zero Summit 34mm Ring
Stainless Steel Screw-Lock inserts are used for every fastener on the mount for a lifetime of trouble-free use. With these inserts, additional thread locking compound is not needed.
Flush mount rail clamps securely and repeatably attach the mount to the rail and avoid snagging on gear.
Two recoil lugs are machined into the base of the mount to transfer energy from the rifle to the mount without putting unnecessary load on the fasteners or clamps.
7075 T-651 aluminum is used for the entire mount for maximum strength and durability, despite the added cost. 7075 aluminum features 150% of the shear strength of 6061 aluminum, and nearly 200% of the tensile strength.
Package Contents:
Zero Summit 34mm Ring
Torx Driver Bits
Artikel-Nr.: SPC-0015-BK
Marke: SPECPRECISION
Weaver Picatinny Rail Scope Mount Barrel Adapter Rings 1"/ 25.4mm 30mm Ring Adapter w/ 20mm Scope Weaver Picatinny Rail Mount
Artikel-Nr.: SPC-1428-BK
RAP-I Mount Rail Accessory Platform – Improved made from 7075 aluminum CNC machining, it works perfectly with NF 30mm mount.
Artikel-Nr.: SPC-1011-BK
The Switch to Side (STS) Mount is a revolutionary design that provides fast transitioning use of a magnifier. When that extra power is needed and seconds count, the STS is the perfect mounting solution. This is the standard mount that comes with the G33, G43 and G45. EOTECH STS Mangifier Mount is compatible with G30, G33, G43 and G45 Magnifiers.
Artikel-Nr.: SPC-1712-BK
Aero Ultralight Scope Mount optimizes performance with a forward-shifted rear ring for improved eye relief,cross-slot keyway recoil protection, and compatibility with AR-type Mil-Spec 1913 Picatinny rails. Engineered to eliminate excess weight, it ranks among the lightest mounts in the industry, balancing durability and portability for precision shooting.
Artikel-Nr.: SPC-1365-BK
The SP-3002 Mount is suitable for optical scopes with a 30mm calibre. Ideal for long range shooting and scenarios where accuracy is required. PUHR SP 3002 mount replica features high quality, durability and reliability. This scope mount has a 0MOA tilt angle for a variety of shooting applications. Height of the mount is 1.50"/1.93" hight and is used to...
Artikel-Nr.: SPC-1893-BK
Ultra-lightweight SPECPRECISION MSR scope mount with universal red dot offset adapter. Supports 90° top or 45° offset installation. Steel offset plate with recoil lugs maintains zero under 7.62mm recoil.
Artikel-Nr.: SPC-0888-FDE
Marke: EVOLUTION GEAR
Tactical Flip Mount with Riser 0.41″ Height 90 Degree For EXPS3 Holo 558 G33 G43 Magnifier Made From MILSPEC Hardcoat Anodized
Artikel-Nr.: SPC-1699-FDE
The AUS Mount is a lightweight, slim-line, low-profile, anti-snag design mounting solution for 30mm diameter magnified optics. It attaches to any M1913 Picatinny rail for quick and tool-free installation.Black and FDE color with original markings in stock now!
Zero Summit 34mm scope mount, 1.7″ optical center height, 2″ offset, 7075-T651 aluminum, 0 MOA, 1.3″ width, anodized finish.
