Reference: SPC-1379-FDE
Specprecision GBRS LERNA Mount T2rds Mount 2.91" for T2rds Red Dot Sight In Stock
Gbrs Lerna Mount suitable for the installation of original and replica T1rds/T2rds/M5/M5S/M5B/ROMEO5/ROMEO4S and other red dot sights.
Banner
G43&EXPS3 combo
FAST Optic Riser BK
EVOLUTION GEAR ROMEO3MAX
mrcro t2 red dot sight WITH LRP QD MOUNT
Height: 42mm/1.653"
HRT is engraved on the side as a part of a special run of mounts.
Includes hardware
Security policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
The HRT Mount is one of the most rugged Aimp0int Micr0/C0mpM5 mounts. Attaches to any Picatinny or STANAG NATO 1913 rail with two Torx screws. it is not going anywhere. Spuhr clamp on one side and the sunked Torx screws on the opposite side. You are not getting anything stuck on this. Lower 1/3 Co-witness Height: 41 mm/1.614" (with Aimp0int Micr0 T-1rds) Height from rail to footprint: 26.26 mm/1.034" Weight: 91 g/3.2 oz Fits the following red dot sights (though height may vary for non-Aimp0int sights):
Aimp0int CompM5
Aimp0int H-1
Aimp0int H-2
Aimp0int T-1rds
Aimp0int T-2rds
Primary Arms Dot
MAKdot S 1×20
Blaser RD 17
VTX Crossfire
VTX Sparc AR
Holosun Paralow 403 models (except the ‘A‘ model)
Holosun Paralow 503 models
Holosun Paralow 515 models
Holosun Paralow 530 models
Sig Sauer Romeo4
Sig Sauer Romeo5
Manufacturer's Part SM-2007B-HRT
Reference: SPC-1379-FDE
Gbrs Lerna Mount suitable for the installation of original and replica T1rds/T2rds/M5/M5S/M5B/ROMEO5/ROMEO4S and other red dot sights.
Reference: SPC-1342-BK
SCALARWORKS Quick Detach LEAP /Aim T-2rds Mount ABSOLUTE
Reference: SPC-1034-BK
The FAST™ MicroS Mount places Aim CompM5s, CompM5b, and Duty RDS sights at 2.26″ optical center line above weapon rails. This stance makes these optics fully compatible with Flip-To-Center Magnifier Mounts and provides all the same application benefits found with legacy FAST Mounts.
Reference: SPC-1385-BK
The Leap/04 QD made of aerospace aluminum, CNC machined, light and sturdy mount ,it is lightest QD mount, without compromising an ounce of strength.
Reference: SPC-1507-BK
Reference: SPC-0970-BK
Featuring a quick-detach (QD) lever mechanism, the FAST LPVO Mount allows for rapid attachment and removal of optics without the need for tools. This enables shooters to quickly switch between optics or remove them for transportation or storage, enhancing versatility and convenience.
Reference: SPC-1419-BK
Optic Mount Modular MICRO Lightweight Elevated MICRO Mount. Made by aluminium, CNC tech, fits all the T2 foot print red dot sight.
Reference: SPC-1424-BK
OMM PIC MOUNT OPTIC MOUNT MODULAR By SPECPRECISION LIGHTWEIGHT LOWER 1/3 DIRECT MOUNT OPTIC RISER Height: 1.2” Width: 1.22” Length: 4.34” Weight: 3.5 oz Optical Centerline: 2.5”
Reference: SPC-1410-BK
Available in black oxidized and FDE colors with original logo.
Reference: SPC-1408-BK
Made by 7075 aluminium , Delta point PRO footprint
Reference: SPC-0878-FDE
IPX 7 Level Water Proof/Nitrogen Filled/Hold Recoil&Zero on fire arms cablibre 5.56/7.62
Reference: SPC-1198-BK
Only Real Gun Replica on the Market, TA31RCO 4x32 COG USMC Rifle Combat Optics (RCO) with Red Dual Illuminated Reticle, True Fiber Optic Illumination, IPX7 Waterproof/Nitrogen Filled/Retains Recoil & Zero Gun Cable 5.56 /7.62, made by SPECPRECISION, accepted for wholesale and retail.
Reference: SPC-1262-BK
The FAST FTC Omni by far the best magnifier mount,foldable arm for Magnifier allows flexible use of Holo Sight alone or with Magnifier, reducing risk of damage.
Reference: SPC-9229-BK
The M5b comes with 4 interchangeable ballistic turrets for bullet drop compensation, allowing for quick height adjustment based on projectile drop calculations.
Reference: SPC-1324-BK
The DUTY RDS with original engraving and original packaging box is a flawless replica, available for wholesale and retail
Reference: SPC-9083-BK
Brand: SPECPRECISION
The Red Dot is made by 6068 Aluminium, has a very clear glued lens, kill flash and protetive cover included in the package.
There are no available reviews. Write your review.
There are no available questions. Ask your question.
Height: 42mm/1.653"
HRT is engraved on the side as a part of a special run of mounts.
Includes hardware