In a world of zip ties, inner tubes and unclean wire routing, our Picatinny WireGuides achieve peace through superior wire management.
Continuing on our rampage to rid the world of poorly constrained switch wires on firearms, the 1913 Picatinny rail was the next battle we had to win. Staying with our minimalist design mantra we sought to create a solution that was both low profile and highly functional. To this end we came up with our Picatinny WireGuide™ Clamps.
We started by making the clamps sit as low in the picatinny slot as possible with the minimal amount of stick out in all directions. We also wanted the wire to sit under the bottom of the lower angle section of the Picatinny rail so that it would be out of the way as much as possible. To do this, we took a rather unique approach to our solution, in that the wire itself becomes part of the clamping mechanism. Some might say that this could be dangerous and possibly damage the switch wires, but fret not. We designed our Picatinny WireGuides™ with safety in mind. When properly torqued*** and installed on an in spec picatinny rail, the wire absolutely cannot be crushed to the point that the insulation fails. While the clamp does slightly compress the wire’s insulation, when installed properly, this will not cause damage. If over torqued, the clamp will fail before the wire insulation is compromised.
With that out of the way, let us move on to the clamps themselves. First we created our Single Wire Picatinny Clamp. This small piece of machined and Type III Hard Anodized 6061 aluminum perfection was designed to hold a wire with a max diameter of 0.130″ (most standard switch wires are 0.110-0.125″). As its honest name implies, it was designed to hold just 1 wire on whichever side of the Picatinny rail you choose. This is a solid, functional piece that will serve all users well. Installation is a breeze and you can use as many as you see fit to contain all the errant wires on your weapon. It can be oriented to hold the wire on either side of the rail, making it simple and versatile.
Next is our Dual Wire Clamp. This clamp, as it’s name implies, is designed to run 2 wires, one on each side of the Picatinny rail. It can be used in many ways from helping those with multiple switches to those that have unique routing requirements. Due to its Dual Hook design, and lack of a dovetail to interface with the picatinny rail (like on the Single Wire clamp) it MUST have a wire on each side to work properly. When combined with the Single Wire Clamp(s) and our M-LOK or Keymod WireGuides™ your cable management woes will be a thing of the past.
Like all of our WireGuide™ Clamps, our Picatinny WireGuide™ Clamps are sold individually or a la carte if you want to be fancy about it.
Reference: SPC-1213-BK
Type: Scope Mounts & Accessories compatible: AR-15 AR-10 rifle Color: Black Material: Aluminium Alloy Model Number: AR Folding Stock Adapter Gen 3-M Single gross weight: 0.2 KG
Reference: SPC-1186-BK
Brand: EVOLUTION GEAR
Color: Dark Brown Brand: Evolutiongear
Reference: SPC-1325-BK
KeyMod&MLOK Management AR Upper Parts
Reference: SPC-9694-001
Reference: SPC-1664-BKMC
Made of 500D Cordura waterproof fabric,Suitable For M640DF Weapon Light
At SPECprecision, we are committed to providing reliable products, professional service, and a secure shopping experience for customers worldwide. We support individual customers, retailers, and business partners with professional assistance before and after purchase.
We provide secure online payment options, including credit card payments through our payment system. If you prefer to pay via PayPal, please contact our customer service team at [email protected], and we will assist you with a PayPal invoice.
We have full confidence in the quality of our products. Each product undergoes multiple inspection procedures before shipment to ensure reliable performance and proper working condition.
If you experience any product quality issue or receive a product damaged during transportation, please contact our customer service team. We will provide a suitable solution and ensure your purchase is properly handled.
We provide worldwide shipping support to customers in most countries, including the United States, United Kingdom, Canada, Japan, Korea, Europe, and many other regions.
Our team has extensive experience with international logistics and can provide suitable shipping solutions according to different destinations and delivery requirements.
For customers who require faster delivery, express shipping options are available through reliable carriers such as DHL, FedEx, or UPS. Delivery time depends on the destination and shipping method selected.
For selected products, we support customized branding solutions, including custom logos and packaging options.
Customers can request customized solutions for AIRSOFT optics, tactical accessories, flashlights, and related products.
Please contact us at [email protected] with your product model, order quantity, logo design, and packaging requirements. Our team will provide a suitable customization solution based on your needs.
SPECprecision provides OEM and custom manufacturing services for tactical and optical products, including red dot sights, rifle scopes, laser devices, tactical flashlights, mounts, and other accessories.
Our engineering team can develop products according to your requirements, including shock resistance, waterproof performance, material selection, structural design, nitrogen filling, and different application environments.
We support product development based on physical samples, technical drawings, or product concepts.
For OEM and custom manufacturing inquiries, please contact [email protected].
Our professional support team is always available to assist with product questions, technical support, and after-sales service.
We value long-term relationships with our customers and are committed to providing reliable products, responsive communication, and professional solutions.
