
















Swampfox Kraken Closed Emitter Dot Sight 1x16mm Red Dot Sight 3 MOA KRK00116-3R
RELEASE THE KRAKEN
Kraken is fully sealed, closed emitter dot sight optimized for defensive and law enforcement use on pistol and long gun applications.
Compared to open emitter reflex sights, sealed systems like Kraken are tougher and easier to keep clean and functional in extreme conditions such as immersion in water or mud.
Kraken features 3 MOA dot available in Red and includes battery-saving Shake n' Wake technology.
Feature include:
3 MOA Dot, powered by CR2032 3V battery.
8000+ hours continuous battery life / 20000+ hours with Shake n' Wake use.
Motion sensing "Shake n' Wake" auto-on / auto-off reticle illumination.
7075-T6 aluminum construction and hardcoat anodized finish.
Inserting & Changing the Battery:
Kraken uses a CR2032 3V battery which is included in the box but not pre-inserted into the optic.
1. Turn the battery cover counter-clockwise to remove it.
2. Insert the battery with the "+" side facing away from the scope body.
3. Turn the battery cover clockwise to close it.
4. Tighten until snug and no farther, there is no need to torque down on a battery.
5. Confirm that the optic powers on by pressing the brightness UP button.
6. Regardless of how often you are using Kraken, we recommend you replace your battery annually.
POWER & BRIGHTNESS
On / Off
Press the brightness UP "▲" button to power on.
Hold the brightness DOWN "▼"button for 3 seconds to manually power off.
When the sight is powered back on it will automatically return to the previous brightness level.
BRIGHTNESS
Kraken is equipped with 10 brightness settings. The two lowest settings are passive aiming compatible with night vision devices.
Use the brightness UP"▲" and brightness DOWN "▼” buttons to adjust brightness level.
When using low brightness settings ensure sufficient contrast against thetarget.
Medium brightness settings are ideal for indoor shooting ranges.
The highest two brightness settings are daylight bright and should only be usedin very bright conditions, Using these settings in darker conditions will cause unwanted glare and reticle bloom.
SHAKE 'N WAKE
After approximately four minutes without sensing movement, Kraken will shut off illumination to save battery life. While “asleep" the battery will draw no power. As soon as movement resumes, the optic will immediately “wake" and resume its previous brightness level.
Kraken does not incorporate a timed fully-shutdown feature that requires the user to press a button to wake.
Shake 'N Wake is seamless and intended to be unobtrusive to the user. itis not a mode that can be activated and deactivated, it is hard wired into the function of the optic.
Shake'N Wake is very sensitive to movement. While wearing a pistol with Kraken mounted, even the body movement of normal breathing is sufficient to keep the optic “awake" and drawing battery power. Kraken must be absolutely still for four minutes before the Shake 'N Wake system will shutoff illumination.
MOUNTING
Closed emitter systems like Kraken cannot mount directly to optic footprints featuring vertical screws to clamp the scope body in place. Because Kraken's body is completely sealed and nitrogen purged, it features two horizontal screws underneath clamping from the side. These two screws travel through two recoil lugs aligning with slots cut in Kraken's adapter plates. The twin recoil lug arrangement reduces screw stress on reciprocating pistol slides compared to open emitter reflex optics.
Swampfox recommends applying blue threadlocker to all Kraken system screws and torquing them to 10-15 inch pounds. Attach the adapter plateto the optic footprint with the included screws, then attach Kraken to theadapter plate.
Three sets of screws are included in the box:
#6-32, for use with the RMR footprint adapter on pistol slides
M3, for use with the MOS slide adapter
M3.5, for use with the RMR footprint adapter on Rebel Riser and Rebel Offset mounts
RETICLE & ZEROING
Kraken features a 3 MOA dot reticle. Krakens with a red emitter will feature a ruby red coating on the interior lens. Krakens with a green emitter will feature a silver coating on the same lens. Kraken features 1MOA-per-click windage and elevation adjustments, with point of impactdirection indicated on the scope body.
One Minute of Angle is equivalent to approximately 1" at 100 yards, or .75” at 75 yards, .50” at 50 yards, etc.
PARALLAX
Kraken is designed to be parallax free at 33 yards. At distances closer than 33 yards, parallax error is very minimal and will not lead to appreciable point of impact shift. At distances past 100 yards, some parallax will be observed, When using your sight at close range, keep in mind that the entire window is available for aiming. lf you can perceive the reticle anywhere in the window, you can use it as a point of aim. For shooting past 100 yards, keeping the reticle more centered in the window will result in more consistent hits on target.
Maintenance
Before cleaning your optic lens, make sure to blow away any
Reference: SPC-0778-FDE
Brand: SPECPRECISION
Perfect replica according to the original MR Red Dot Reflex Sight. 2 colors are available:BLACK/FDE in stock
Reference: SPC-1288-BK
Waterproof and nitrogen filled fog-proof performance, 800GS impact resistance, Perfect for GBBr, AIRSOFT, Firearms
Reference: SPC-1146-FDE
Brand: HOLY WARRIOR
The latest version of HOLYWARRIOR S1 EXPS3, currently the best replica available in the market.
Reference: SPC-0967-BK
The SPITFIRE HD GEN II 5X PRISM SCOPE 5.56 AR-BDC4 Reticle Fully Multi-Coated FMC Lens with Full Markings is only for AIRSOFT.
Reference: SPC-1504-BK
SPECPRECISION Sentinel SR3 Compact Reflex Red Dot Sight features Auto-Off/Shake-Awake, 50K-hour battery life, and 3 reticle options. Auto-Off / Shake-Awake 50,000 Hours Battery Life 3 Reticles (2 MOA Dot, 32 MOA Circle, 32 MOA Circle + 2 MOA Dot) Matches RMR / Holosun 507C footprint. The SPECPRECISION R3 Compact Reflex Red Dot Sight is compact and...
Reference: SPC-1753-BK
Optimized for all purpose versatility, Liberty II features a 24mm window and modern body design to complement its universal RMR footprint. Choose between a red or green 3 MOA dot or new multi-reticle variant with four easy-to-switch reticle options. Liberty II offers 10 illumination setting for clear visibility in any light condition and utilizes Swampfox...
Reference: SPC-9023-BK
Brand: EVOLUTION GEAR
Reference: SPC-1654-BK
The Electric Scope Switch mount is meticulously crafted using CNC machining from high-quality aluminum, ensuring both durability and precision. This innovative mount features a built-in rechargeable lithium battery, allowing for extended use without the need for constant battery replacement. It is designed to be compatible with a wide range of LPVO...
Reference: SPC-9014-FDE
Including NF ATACR 1-8 24mm,C1 Offset Mount IPX 7 Level Water Proof/Nitrogen Filled/Hold Recoil&Zero on fire arms cablibre 5.56/7.62. Nightforce ATACR 1-8X24mm F1 .1 MRAD NVD PTL FC-DMX Dark Earth Riflescope,ED optical glass, 10 levels of brightness adjustment, compatible with NV night vision system
Reference: SPC-1095-TAN
Brand: SPECPRECISION
L4G24 mount made by 6068 AL. Surface oxidation treatment , 1:1 replica according to the original Wilcox L4G24. anti salt spray corrosion. Military Standard.
Reference: SPC-1285-BK
Scope Turret Adjustment: .Mil-R Zero Stop elevation turret and standard illuminated Mil-R reticle with free gift sunshade now!
Reference: SPC-1357-FDE
VMR-2 MOA Reticle,True fiber reticle,IPX7, 1200G recoil resistance,upgraded version in 2024, realsteel narrow edge speed sight.
Reference: SPC-1670-BK
This product includes three components: a red dot sight mount, a magnifier mount, and a laser pointer mount. Together, they form a modular system that maintains an optical center height of 2.25 inches. The system supports the RML configuration (Red dot – Magnifier – Laser), enabling quick and seamless integration of red dot sights and magnifiers with...
Reference: SPC-1583
New 2025 Version MAWL IR LASER Replica IR laser aiming device , Available in VCSEL mawl and EEL mawl IR Illuminator high end Versions. Hold zero 5.56 or 7.62 calibers firearms,PCB Potted.Features identical to the original: IR illuminator, visible laser, and IR laser.
Reference: SPC-9780-BK
Made from 6061-T6 CNC aluminum Cantilever 40 mm/1.57” Color Black Hardcoat Anodized Height 38 mm Quick Release Yes Rail/Type Picatinny Tilt 6 MIL/20.6 MOA Tube Diameter 34 mm
Reference: SPC-1694-BK
ISEG MKII NGAL High Power Illuminator, available in VCSEL and EEL Versions. Visible and invisible lasers are co-axial,hold Recoil&Zero on firearms cablibre 5.56 and tactical airsoft milsim.
Reference: SPC-1406-FDE
34mm Tube Diameter,ED 6-24X50 FFP Scope ,Killflash,Sunshake,Filp Cover,Optic mount,Throw lever Accept brand customization and wholesale