![SPECOPTICS SPU-P2 1.54" Picatinny Magnifier Mount for ACRO Red Dot Sights with G33 G43 G45](https://www.specprecision.com/28696-large_default/specoptics-spu-p2-h39mm-acro-magnifier-mount.jpg "SPECOPTICS SPU-P2 1.54" Picatinny Magnifier Mount for ACRO Red Dot Sights with G33 G43 G45")
The SPECOPTICS SPU-P2 Mount allows ACRO-footprint red dot sights, such as P1 and P2, to work with G33, G43, and G45 style magnifiers at a 1.54" / 39mm optical center height. With quick-detach installation and a flip-to-side magnifier design, it enables fast switching between 1X and magnified aiming.
The SPECOPTICS SPU-P2 H39mm Picatinny Magnifier Mount is designed for ACRO footprint red dot sights, such as P-1 and P-2 style optics, allowing them to work together with G33, G43, and G45 style magnifiers at a matched 39 mm / 1.54" optical center height.
Built with a durable black hardcoat anodized finish, the SPU-P2 uses a solid Picatinny rail interface for stable mounting. The front red dot platform is designed for optics using the ACRO footprint, while the rear magnifier section is compatible with G33 / G43 / G45 style flip-to-side magnifiers.
This mount allows quick installation and removal of the magnifier, making it easy to switch between a lightweight red dot-only setup and a red dot + magnifier configuration. The flip-to-side magnifier design enables fast transitions between 1X red dot aiming and magnified observation without removing the optic system from the rifle.
With a 39 mm / 1.54" optical center height, the SPU-P2 provides a clean and properly aligned setup for users who want to run an ACRO footprint red dot together with a compatible magnifier on Picatinny rail platforms. It is suitable for tactical setups, training rifles, airsoft builds, and compact red dot + magnifier configurations.
Specifications
Color: Black Hardcoat Anodized
Article No.: SPU-P2
Red Dot Footprint: ACRO Footprint
Compatible Red Dots: P-1 / P-2 Style Red Dot Sights
Compatible Magnifiers: G33 / G43 / G45 Style Magnifiers
Optical Center Height: 39 mm / 1.54"
Rail Interface: Picatinny Rail
Magnifier Compatible: Yes
Flip-to-Side Function: Yes
Material: CNC Machined Aerospace-Grade 6061 Aluminum
Weight: 153g / 5.4 oz
Note:
Red dot sights and magnifiers are not included with the mount.
Trademark / Compatibility Notice
ACRO is a trademark of Aimpoint AB. All references to ACRO, P1, and P2 are for compatibility description only and do not imply any affiliation with or endorsement by Aimpoint AB.
Q: What red dot footprint does the SPECOPTICS SPU-P2 mount support?
A: The SPECOPTICS SPU-P2 mount supports ACRO-footprint red dot sights, including P-1 / P-2 style enclosed red dots and other ACRO-footprint optics from different brands. It is designed for users who need a compact ACRO red dot and magnifier mount setup on a Picatinny rail.
Q: Which magnifiers are compatible with this mount?
A: This mount is designed to work with G33, G43, and G45 style flip-to-side magnifiers. It allows the magnifier to align with the ACRO-footprint red dot at a 39 mm / 1.54" optical center height.
Q: What is the optical center height of this mount?
A: The optical center height is 39 mm / 1.54". This height is designed to align the ACRO-footprint red dot sight with compatible G33, G43, and G45 style magnifiers.
Q: Does this product include the red dot sight and magnifier?
A: No. This product includes the mount only. The red dot sight and magnifier shown in some photos are for demonstration purposes and are not included.
Q: What rail system does the SPECOPTICS SPU-P2 mount use?
A: The SPECOPTICS SPU-P2 mount is designed for standard Picatinny rail platforms. It can be used on tactical rifles, training rifles, airsoft builds, and other compatible Picatinny rail setups.
Q: Can the magnifier flip to the side?
A: Yes. The magnifier section uses a flip-to-side design, allowing users to quickly switch between unmagnified 1X aiming and magnified aiming when using a compatible magnifier.
Q: What material is the mount made from?
A: The mount is CNC-machined from 6061 aerospace aluminum and finished with a black hardcoat anodized surface. This provides a lightweight structure with good durability for tactical, training, and airsoft use.
Q: How much does the SPECOPTICS SPU-P2 mount weigh?
A: The mount weighs approximately 153 g, making it a compact and lightweight solution for combining an ACRO-footprint red dot sight with a compatible flip-to-side magnifier.
Q: Is this mount suitable for airsoft and training rifles?
A: Yes. The SPECOPTICS SPU-P2 mount is suitable for airsoft, tactical training rifles, and other Picatinny rail platforms where users want to run an ACRO-footprint red dot sight with a G33, G43, or G45 style magnifier.
Reference: SPC-1688-BK
Monolift Style Riser Mount Places both Romeo8T &Juliet4 /EXPS3&G33 on the same 2.26” optical center, can also be combined with other laser pointers for a better heads-up posture
Reference: SPC-9754-BK
The Specprecision Unity FAST Optic Riser elevates your red dot optics to a 2.26″ center line, Designed with an elevated M1913 Picatinny platform, it pairs perfectly with FAST FTC magnifier mounts for enhanced versatility and performance. MATERIAL: Aluminum COATING:Type III Hardcoat AnodizedAll Direct-to-Rail Mounted Optics. Optimized for Lower 1/3 Height...
Reference: SPC-1024-BK
The Ari Low T2 Micro Mount is designed for the Micro T1 and T2 optics, and will also function with other red dots using the same footprint, including the t H1/H2, Comp M5/M5S, Duty rds, Sig Romeo 5, Vortex Crossfire, and Holosun HS503/515/530.
Reference: SPC-1399-BK
The lower 1/3 co-witness height is 40.4mm (1.6 inches) BCM Lower 1/3 Co witness A/T Optic Mount for M R OCapability in the face of the unexpected and catastrophic, the Lower 1/3 Co witness Mount is built in anticipation of a “no fail” shot that will save another human life.
Reference: SPC-1336-BK
The Standard Low Picatinny Mount w/ T-1rds,T-2rds,M5,M5S,M5B,ROMEO5 Original Footprint Made by 6068 Al
Reference: SPC-1329-BK
Badger C1 MICRO Mount Will accept any of the MICRO line from T1,T2,H1,H2,M5 etc
Reference: SPC-0006-BK
Brand: SPECPRECISION
Reference: SPC-1532-BK
Suitable for Micro Red Dot Sight with original footprint Lower Third-Lower 1/3 co-witness Hieght
At SPECprecision, we are committed to providing reliable products, professional service, and a secure shopping experience for customers worldwide. We support individual customers, retailers, and business partners with professional assistance before and after purchase.
We provide secure online payment options, including credit card payments through our payment system. If you prefer to pay via PayPal, please contact our customer service team at [email protected], and we will assist you with a PayPal invoice.
We have full confidence in the quality of our products. Each product undergoes multiple inspection procedures before shipment to ensure reliable performance and proper working condition.
If you experience any product quality issue or receive a product damaged during transportation, please contact our customer service team. We will provide a suitable solution and ensure your purchase is properly handled.
We provide worldwide shipping support to customers in most countries, including the United States, United Kingdom, Canada, Japan, Korea, Europe, and many other regions.
Our team has extensive experience with international logistics and can provide suitable shipping solutions according to different destinations and delivery requirements.
For customers who require faster delivery, express shipping options are available through reliable carriers such as DHL, FedEx, or UPS. Delivery time depends on the destination and shipping method selected.
For selected products, we support customized branding solutions, including custom logos and packaging options.
Customers can request customized solutions for AIRSOFT optics, tactical accessories, flashlights, and related products.
Please contact us at [email protected] with your product model, order quantity, logo design, and packaging requirements. Our team will provide a suitable customization solution based on your needs.
SPECprecision provides OEM and custom manufacturing services for tactical and optical products, including red dot sights, rifle scopes, laser devices, tactical flashlights, mounts, and other accessories.
Our engineering team can develop products according to your requirements, including shock resistance, waterproof performance, material selection, structural design, nitrogen filling, and different application environments.
We support product development based on physical samples, technical drawings, or product concepts.
For OEM and custom manufacturing inquiries, please contact [email protected].
Our professional support team is always available to assist with product questions, technical support, and after-sales service.
We value long-term relationships with our customers and are committed to providing reliable products, responsive communication, and professional solutions.
The SPECOPTICS SPU-P2 Mount allows ACRO-footprint red dot sights, such as P1 and P2, to work with G33, G43, and G45 style magnifiers at a 1.54" / 39mm optical center height. With quick-detach installation and a flip-to-side magnifier design, it enables fast switching between 1X and magnified aiming.
